In most rooms, the walls and the floor are finished in different materials, and each change marks a place where the eye pauses. Wall2Floor, from Novacolor Italia, carries one finish across the horizontal and vertical surfaces of a room, with no joints to interrupt it.
It’s a decorative coating system for interior surfaces, made for residential and commercial spaces, and it comes in three systems: microcement, resin, and hybrid. Here is a closer look at the idea, the three systems, and how to plan a space around them.
What a continuous finish does for a room
A continuous surface guides the eye across a room without stopping. Light travels across it from one side to the other, and the texture of the material stays consistent from wall to floor, so the space feels unified.
For designers, that changes how transitions get handled. With one material running through the room, the place where a wall meets a floor belongs to the same surface on both sides.
Three systems for different spaces
Each Wall2Floor system suits different needs in a room.
Microcement
Wall2Floor Top Coat and Top Coat Fine are the mineral decorative coatings behind the microcement system. They come in a wide range of tones through Novacolor’s tinting system and have very low emissions of volatile organic substances, which suits residential spaces.
Resin
The resin system is Wall2Floor Top Coat Waterproof, a two-component epoxy coating for interior horizontal and vertical surfaces. It’s designed for wet areas such as bathrooms and spas, and for surfaces that are repeatedly in contact with water. It forms a continuous, water-repellent surface with high wear resistance, and it carries A+ certification for low emissions.
Hybrid
The hybrid system completes the range and gives a project a third option to match how a space is used.
Where a continuous finish fits
Wall2Floor is made for both private and commercial settings, from apartments and shops to hotels and spas. The system can also be applied over certain existing finishes, which makes it a candidate for renovation as well as new construction.
Planning a space with a continuous finish
The best time to talk about a finish like this is early, while the layout and materials are still taking shape. Knowing how a room will be used helps decide which system fits, since a bathroom and a living room ask different things of a surface. Existing surfaces matter too, and an experienced applicator can look at them and advise on what the project needs.
Where to begin
If you’re picturing one Wall2Floor finish running through a room, start with a conversation. Tell us about the space and how it will be used through our contact page, and we can talk through the options and point you toward the right next step.
Frequently asked questions
What is Wall2Floor?
Wall2Floor is a continuous decorative coating system from Novacolor Italia for interior horizontal and vertical surfaces. It creates finishes without joints and comes in microcement, resin, and hybrid systems.
Can Wall2Floor be used on both walls and floors?
Yes. The system is designed for horizontal and vertical surfaces, so the same material can carry from wall to floor.
Which system is made for wet areas?
The resin system. Wall2Floor Top Coat Waterproof is a two-component epoxy coating designed for wet areas such as bathrooms and spas.
Who should apply it?
A trained applicator. A continuous finish depends on good preparation and careful application, so an experienced professional is the right choice. If you need help finding someone in your area, let us know and we can connect you with a skilled applicator near you.